The Installation Failed in First Boot Phase Error

WRITTEN BY: supportmymoto.com STAFF

If you’re dealing with ‘The Set up Failed in First Boot Part Error’ if you find yourself attempting to put in Home windows 10 or attempting to replace your present Home windows, you aren’t alone. A lot of Home windows 10 customers are reporting to face the identical challenge. If you’re seeing this message in your laptop, Home windows set up in your laptop will likely be stopped with a message “We couldn’t set up Home windows 10”. This downside is comparable in case you are dealing with these errors-

0x80070004 – 0x3000D
The set up failed within the FIRST_BOOT section with an error through the MIGRATE_DATE operation.

0xC1900101 – 0x30018
The set up failed within the FIRST_BOOT section with the error through the SYSPREP operation.

0xC1900101-0x30017
The set up failed within the FIRST_BOOT section with an error through the BOOT operation.

These errors are generated attributable to a misconfigured registry in your laptop or attributable to a scarcity of area in your onerous drive. You’ll be able to resolve these errors by following these fixes-

Be sure you create a restore level to your laptop. In case something goes incorrect you’ll be able to carry out a system restore.

Repair 1 – Briefly disable your Firewall

NOTE-
[THIS FIX IS FOR USERS WHO ARE USING A PRIVATE  NETWORK]

Home windows Firewall could be the reason for the error you’re dealing with through the set up of Home windows in your laptop. You’ll be able to disable the Home windows Firewall by following these steps-

1. Press Home windows key+ R to launch Run, and sort “management firewall.cpl” and hit Enter.

 

Run Firewall

 

This can open firewall settings in Management Panel.

2. Now, within the management panel, within the left pane, click on on “Flip Home windows Defender Firewall on or off“.

 

Widnows Firewall

 

3. Now, underneath the Non-public community settings, click on on “Flip off Home windows Defender Firewall (not really helpful)” and click on on “OK” to show your Firewall off.

 

Firewall 1

 

Restart your laptop and begin the Home windows set up course of, examine any of the above-mentioned errors are occurring or not.

Additionally , disable any third social gathering anti virus like malwarebytes and so on. and take a look at once more.

If the error continues to be there then go for the following repair.

Repair-2 Disable Safe boot in BIOS

1. Shutdown your PC utterly.

2. Now, begin it with energy button and begin urgent BIOS key repeatedly to enter BIOS mode

Under are the BIOS keys for various Laptop computer producers.

 

Bios Boot Menu Keys Laptops Min

 

3. Find the Safe boot possibility and disable it.

 

Secure Boot Disabled Min

 

Its both in Boot Choices, or at Authentication settings.

Repair-3 Test for Home windows Replace

This downside you’re dealing with could also be as a result of some necessary replace is pending in your laptop. In an effort to examine for Home windows Updates, observe these subsequent steps-

1. Press Home windows key+I to open Settings in your laptop.

2. Click on on “Replace & Safety” settings.

3. On, the correct pane, click on on “Test for Updates“.

Check For Updates Settings Min

 

Home windows will examine for updates, after which it should obtain the replace and allow you to select a time to restart your laptop to finish the replace process.

Test if any of the errors are nonetheless there or not. If the error continues to be inflicting issues, go for the following repair.

 

Repair-4 Replace your Home windows in Clear Boot

Clear booting your laptop ensures that your laptop is booting with a minimal set of drivers and fewer startup applications. This may resolve the issue with ‘The set up failed in first boot section error’In an effort to clear boot, your laptop observe these steps-

1. You’ll be able to open the Run window by urgent Home windows key+R.

2. Then, sort “msconfig” after which click on on “OK“.

 

Msconfig Run

 

System Configuration will open.

3. At first, it’s a must to go to the “Common” tab and

4. Then, uncheck the field beside the “Load startup objects“.

5. Make certain the “Load system providers” is checked.

 

General

 

6. Then, go to the “Companies” tab.

7. After that, examine the “Disguise all Microsoft providers” after which click on on the “Disable all” .

8. Lastly, click on on “Apply” and “OK“.

 

Services 2

 

Reboot your laptop, will probably be booted in clear mode.

Attempt once more and Test if the error continues to be occurring or not. If the error continues to be there then go for the following repair.

 

Repair-5  Obtain and run Official Home windows Replace Troubleshooter

You’ll be able to run Home windows Replace Troubleshooter from the official Microsoft discussion board, and it may possibly troubleshoot your downside. In an effort to obtain and run Home windows Replace Troubleshooter observe these steps-

1. Obtain Windows Update Troubleshooter. Go to the obtain location and double click on on “wu10” to open it.

 

Windows Update Troubleshooter

2. Now, click on on “Subsequent” within the troubleshooter window.

 

Windows Update Troubleshooter1

 

3. Now, this course of will take a while as Home windows will detect any form of downside along with your pending Replace.

4. Now, click on on “Subsequent” to use the repair.

 

Windows Update Troubleshooter2

 

As you reboot your laptop, Home windows Replace Troubleshooter will repair the problem.
Test in case you are dealing with the identical challenge once more or not. If the problem continues to be there, then go for the following repair.

 

Repair-6 Rename the Software program Distribution Folder

You’ll be able to rename the Software program Distribution folder in your laptop, and look if renaming it has labored to your downside. Observe these steps to rename the folder-

1. Step one to open the CMD terminal is to sort “cmd” within the Search field.

2. Then, right-click on the “Command Immediate” within the search consequence after which select “Run as administrator“.

 

Cmd Search New

 

2. Merely, copy and paste these instructions within the terminal after which it is advisable to press Enter after pasting every of them.

web cease wuauserv
web cease cryptSvc
web cease bits
web cease msiserver


Wu Cmd1

 

3. Now, as a way to rename the Software program Distribution folder, simply copy and paste these two instructions and hit Enter after every command-

ren C:WindowsSoftwareDistribution SoftwareDistribution.previous ren C:WindowsSystem32catroot2 catroot2.previous

 

Rename Sofftdistri

4. Now, all it’s left to start out the stopped providers once more. Copy these instructions within the Command Immediate and hit Enter to provoke the providers once more.

web begin wuauserv
web begin cryptSvc
web begin bits
web begin msiserver


Startupdateservice

 

Reboot your laptop.
Attempt to replace your Home windows 10 once more, if the error continues to be occurring then go for the following repair.

 

Repair-7 Run System File Checker in your laptop

System File Checker (SFC) is a instrument that may detect and restore corrupted information of Home windows put in in your laptop. You’ll be able to run SFC with following commands-

1. Press Home windows Key+R to launch Run. Sort “cmd” and press “Ctrl+Shift+Enter“. This can open Command immediate with Administrative rights.

 

Cmd

 

 

2. Sort this command and hit Enter. This can take a while.

sfc /scannow

Sfcscan

Wait until the method is full.

 

OR, If this fails on laptop observe this step-

 

2.Sort this command in command immediate and hit Enter.

sfc /scannow /offbootdir=c: /offwindir=c:home windows

 

Sfc2

Wait until the method is accomplished.

 

3. Now, within the command immediate window, sort these instructions and hit Enter after every command.

Dism /On-line /Cleanup-Picture /CheckHealth
Dism /On-line /Cleanup-Picture /ScanHealth
Dism /On-line /Cleanup-Picture /RestoreHealth

 

Dism

Look forward to these instructions to finish the checkup in your laptop.

NOTE-

If these instructions didn’t work out for you then repeat the step 3 with following commands-

Dism /Picture:C:offline /Cleanup-Picture /RestoreHealth /Supply:c:testmountwindows Dism /On-line /Cleanup-Picture /RestoreHealth /Supply:c:testmountwindows /LimitAccess

Dism Alternative
Look forward to the method to be accomplished.

Reboot your laptop. Test if the issue with ‘The Set up failed in first boot section error’.

Repair-8 Try a Registry Repair

It’s doable that you’re dealing with this error is triggered by a registry error. You’ll be able to resolve the issue along with your registry by following these things-

1. Press Home windows Key+R to launch Run. Sort “regedit” and  hit Enter.

 

Regedit

 

2. Now, on the left pane of the registry window, navigate to this location-

ComputerHKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWindowsUpdate

Now, click on on “OSUpgrade“.[NOTE- If you can’t find “OSUpgrade” then follow this step-

2(a). Click on Windows Update. Now, right click on an empty space. Click on “New” and click on “Key“. Name it “OSUpgrade“.

 

Registry New

 

3. Now, select “OSUpgrade” and right click on any empty space on right pane. Click on “New“. Then, click on “DWORD (32-bit) Value“. Name the registry key as “AllowOSUpgrade”.

 

Osupgrade

 

4. Double click on “AllowOSUpgrade” and change the ‘Value Data‘ to “1“.

 

Allowosupgrade

Restart your computer.

Check if you are facing the issue at the time of upgrading the Windows or not. If the same issue still persists, go for the next fix.

Fix-9 Check your disk

If you are installing Windows in a drive with a low disk space, the installation process may fail. Always check the free disk space on your hard drive. There should be at least 30 GB free space available on your computer before installing Windows on your computer. To check disk space on your computer follow these easy steps-

1. Press Windows key+E to open File Explorer window. Now, on the left pane, click on “This PC” (OR, < the name of your computer>).

 

File Explorer

 

2. Now, Look at the drive you want to install/upgrade Windows 10. If the drive has at least 30 GB free space then, go for the installation. Otherwise, delete or move some folders.

 

Free Disk Space

Your problem with ‘The Installation Failed in First Boot Phase Error’ should be solved.

NOTE : Please do not copy - https://supportmymoto.com
See also  WHAT’S the difference between chi air, i.chi and chi flat irons are they all from the same company?

Leave a Reply