How to Upgrade Actiontec ECB6200 Firmware


I lately bought the Actiontec MoCA 2.0 Ethernet to Coax adapter as a result of my total home is wired for coax and I lately upgraded to the FIOS Quantum Gateway that additionally helps MoCA 2.0.

Utilizing this adapter, I might enhance the native information switch rate on my LAN to someplace round 400 Mbps or 50 MB/s as in comparison with the earlier velocity I used to be getting with MoCA 1.1, which was round 100 Mbps or 12.5 MB/s.

I additionally lately wrote a submit on my different web site explaining how upgrading to the new Quantum Gateway is an effective transfer in case you have FIOS on your Web.

actiontec moca 2 adapter

Regardless that it is a nice adapter and one of many only a few on the market to help MoCA 2.0, it additionally has some points. For those who learn the evaluations on Amazon, it’s both fabulous or it drops often and needs to be restarted.

Fortunately, Actiontec has been on prime of this with new firmware updates. Sadly, I couldn’t discover one web site that might inform me methods to replace the firmware on the adapter! Lastly, I acquired in contact with the customer support reps at Actiontec and realized the process.

On this article, I’m going to stroll you thru the method of connecting to the net interface on the Actiontec ECB6200 adapter and updating the firmware. As well as, I’ll additionally present a obtain hyperlink for the most recent firmware that they supplied me. This process might or might not work on the ECB6000.

See also  6 Fixes For Astro A50 Mic Not Working

Improve ECB6200 Firmware

To get began, you need to disconnect the coax cable from the adapter. When you do this, go forward and plug one finish of an Ethernet cable into the adapter and the opposite finish into a Home windows PC.

Now in your Home windows PC, we now have to alter some community settings in an effort to connect with the net interface on the adapter. To do that, open Management Panel and click on on Community and Sharing Middle. Be sure to change from Class view to Small or Massive icons.

network and sharing center

Now go forward and click on on Change Adapter Settings within the left hand facet menu.

change adapter settings

Proper-click on Ethernet or Native Space Connection and select Properties.

lan properties

Choose Web Protocol Model 4 (TCP/IPv4) from the checklist after which click on on the Properties button.

tcpip v4 properties

Go forward and choose the Use the next IP tackle radio button and sort within the following numbers as proven beneath. For the IP tackle, I selected, however you possibly can select something for the final  quantity so long as it doesn’t finish with .30 or .1.

ip address settings

Be certain to set the default gateway to You would not have to enter any numbers for the DNS servers. Click on OK after which OK once more to get again to the Management Panel. Now open an online browser and sort within the following IP tackle:

actiontec login

If every thing is configured correctly, it is best to see a easy Actiontec webpage with data concerning the adapter. The place it says SW Model is the present firmware model for the Actiontec adapter. The newest model as of this writing is


You may obtain the most recent flash model from the hyperlink above. This was despatched on to me by Actiontec and I additionally made certain to scan it utilizing VirusTotal to verify it was clear. Now click on on SW Replace and click on the Browse button to pick the .BIN file. You clearly need to unzip the contents first earlier than making an attempt to add the file.

See also  How to Remotely Control Your Computer with ‘Chrome Remote Desktop’ [Google Chrome]

actiontec software update

Click on the Add button and it’ll begin importing. You’ll see the % uploaded and as soon as it reaches 100%, it ought to say Executed and Rebooting. Notice that it doesn’t truly refresh the display at this level. It is best to wait a minute or so after which merely attempt to refresh the webpage once more.

For me, I needed to replace a few these and bumped into a couple of points. Firstly, it will typically get caught at a sure share when importing. The primary time I attempted, it acquired to 87% after which simply sat there. Ultimately, I unplugged it, plugged it again in after which tried once more. It did ultimately work.

On one other one, the replace went high quality, however once I related it again within the location the place I used it in my home, it will repeatedly energy cycle. The ability mild would come up, then the coax mild would come on after which the coax mild would exit about two seconds later. The ability mild would then exit and again on once more after which the identical factor with the coax mild. On that one, I needed to press and maintain the reset button for about 10 seconds after disconnecting all cables and that fastened the issue.

For those who’re studying this submit a number of months after the date it was written, make sure to contact them immediately at 888-436-0657 or fill out this online technical support form to get the most recent firmware model emailed to you. If in case you have any questions, be at liberty to remark. Get pleasure from!

See also  Fix: Destiny 2 Error Code Weasel [Complete Guide]

NOTE : Please do not copy -

Leave a Reply

Situs Judi Slot Online Terpercaya

Link Slot Gacor

Slot Anti Rungkat

Slot Online Terpercaya