Are you wondering how to fix a fuse that keeps blowing? I know I was one when I discovered the hard way. How to fix a fuse that keeps blowing? Read this article and find out.
Most people know when a fuse blows it stops blowing! They just do not realize how the fuses actually work. You see, when a fuse blows, the magnetic field around the fuse is broken, and energy is lost. Thus, you may hear a loud bang or small sparks as the fuse burns up.
How to fix a fuse that keeps blowing?
If you are wondering how to fix a fuse that keeps blowing, you need to be aware of how it works. The reason why it will keep blowing is that there is some sort of energy being lost. And when this happens, the fuse is in a very delicate state of conductivity. It can melt, or break, causing the energy loss.
There are basically two types of fuses-those that are open and closed. Closed fuses will give out more heat than an open fuse. So if you are dealing with a closed fuse, you need to be very careful.
Before learning how to fix a fuse that keeps blowing, you need to identify what is wrong. That is where knowing how they work will come in handy. When you have your circuit breaker, you should first turn it on and shut it off. Next, look in the breaker panel and see which wire is the live wire. If you see the “open” symbol, then you know that the wire is live and needs to be replaced with a new one.
Now, how to fix a fuse that keeps blowing? You will need to use wire stripping. Take the wire that the breaker is connected to and wrap it around the insulation on the fuse. Once you have done that, you will notice that the power will start flowing again.
If it does not seem to work, then it could be that the fuse board has developed a short. To check, remove the fuses from the terminal and look at the bottom of the fuse. Sometimes a short will just show up as a black spot. If it is there, then you will have to replace the fuse board.
One thing to remember about how to fix a fuse that keeps blowing? If you are having trouble with a fuse and it just won’t quit, you may want to try unplugging the circuit first. Then, try to turn the power back on. Sometimes the fuse just needs to be replaced in order for the circuit to work again. However, if you have tried everything else, and it still won’t work, you may want to call a licensed electrician to see what the problem is so that you don’t do anything to hurt yourself.
First, you can try to inspect the fuse box. There will be two different circuits: the one going to your house, and another that go to your fuse box. You should be able to access the wires that are running from the fuse box to your house. If you cannot find these wires, then you will need to use a wire cutter to cut them. When cutting the wires, make sure that you don’t cut through the insulation.
Take a screwdriver and pry out the insulation that is surrounding the wires. This will help you find the fuse box fuse. It will be very hot and you don’t want to burn yourself. Once you have located it, take your new fuse and attach it to the new circuit.
The next step is to reattach the power to your house. Open up the breaker box that is in your house. You will see a black box with numbers on it. Remove the fuse from the box by unscrewing the antenna cable from the center of the board. The antenna cable will help you determine what type of fuse you need to buy.
Last, if all else fails, you can take out your old fuse board and cut all the wires to the breaker. This will help you replace the fuse to the board. Before you replace it with the new one, make sure that you plug it in and turn it on first. I am pretty sure that you will find the answer on how to fix a fuse that keeps blowing from reading this article.