Your computer that won’t turn on. You think you’re the only one with this problem but it’s actually a big problem for millions of computers all over the world. No matter what kind of screen your computer uses, there are certain steps you can take to fix it. Whether it’s a laptop or an older desktop, there’s a good chance that it’s freezing up because of a bad power supply. Luckily, it’s very easy to fix this problem.
It is not an easy task to fix a computer that won’t turn on even if you have all the latest upgrades and devices fitted. It is like trying to put in food into a big bag, you just can’t fit everything in there. The same thing applies when trying to take apart a complicated device such as a laptop or a computer. So many moving parts and intricate wires get mixed up that it becomes very difficult to do so without any assistance. How to fix a computer that won’t turn on? . In short, it becomes impossible to troubleshoot and fix the problem without any outside help.
How do you force a computer to start?
There are several reasons why the computer won’t start like the way you want it to. However, the only indicator that you could see is that nothing works and you can’t move with just that one indicator. Here are some of the main reasons why a laptop or a computer system will not turn on:
When you look at computer technology and you see people running around in circles trying to fix their computers with cords and tools that don’t even appear to make any sense to you, it can be a little bit intimidating. This is not only due to the fact that most computer technology is incredibly confusing to you, but it is also because there are so many different types of computer on the market today that there is virtually no way to know if you need one or not unless you spend money on an extended warranty plan. However, if you are one of the millions of people who do not have these plans and have been looking for ways to fix their broken computer, then you might want to look at some tips for troubleshooting computer systems that can help you fix a computer that won’t turn on.
One of the first things that you should do when you see a computer that won’t turn on is to check the power source. If you have a laptop, then it is important that you connect the computer to a wall outlet using a power cord, not the battery power supplied by the battery. Sometimes, the power cord can get damaged or even rip through the plastic casing of the case, which will then allow the AC power supplied by the wall outlet to escape, which will then lead to your computer not being able to turn on. Other times, the power supply on the computer may just be plugged into a wall outlet that is not grounded, which will lead to your computer without needing to use a surge protector in order to make sure that the power is properly supplied and to avoid any damage to your computer.
If you find that your computer has just tripped on its own power and is now showing signs of turning on, one of the other things that you can try is to hold the power cord to the back of the computer and gently massage it to make sure that the connection is secure. If you have a keyboard with a mouse, you can push the button on the back of the mouse and if it clicks, this may also help to make sure that the connection is secure and will help your computer to start. If these don’t work, then you might need to have a surge protector or a surge cable to help keep your computer running.
When Windows boots in Safe Mode, it is basically the operating system without any drivers, programs, or installed software. This is very much like what happens when you turn off a PC but without inserting the power adapter. To make sure that this does not happen to you, try shutting your laptop in Safe Mode then re-starting it. If you are in Safe Mode and you have problems you need to be able to go into the BIOS menu and manually change the various parameters that control the system so that they can run normally again.
Power Supply Problems
Sometimes your laptop’s power button will not light up when it is in safe mode and it takes a few seconds for it to respond. Other times it will be responsive but just turn it off and then on again. If you are able to fix the power button issue by simply unplugging it and then turning it back on, then you have probably found your problem and can safely proceed.
Sometimes you will notice that the screen is flicking when you attempt to start the system. This generally happens if there is a conflict between the graphics card and the power supply. The most common cause of this is that the power supply is unplugged and then plugged back in again. If you cannot seem to find the problem in this way then you may need to run some diagnostic tests. You can do this by connecting a USB flash drive and running a disk scan or even an online tool that will check for errors on your part. Once you have these tests completed you should then unplug your power supply and plug it into an unplugged terminal.
If you have an older model of Windows that came installed without a uefi firmware chip in it, then you will need to download and install a wifi driver. A left (Unified Efi) driver is one that will allow your computer to boot up directly from the hard drive, rather than having to boot up your PC through the BIOS. To do this you need to open the “Safe Mode” settings on your BIOS and then press F2 to trigger the installable BIOS chip. After the BIOS has been installed you will need to restart your computer in order to take advantage of it.
Check Your Monitor
First off, there may be absolutely nothing wrong with your computer system at all. The easiest possible test is to simply check whether your monitor is functioning properly or not and whether the other monitor connections are secure and securely in place. Simply plugging the monitor into the computer will not always provide you with the ultimate result. It’s usually a good idea to try to view the display of your screen from as far away as possible – and even then this simple test will often prove fruitful. The second easiest test to run when troubleshooting a monitor is to make sure that both your video connections and audio connection are firmly secured in their respective plugs and that they are not wiggling about on the desk top. If a cable slips out of its position and falls onto the floor, it’s fairly easy to grab your monitor and correct whatever is going on.
Once you have made sure these two basic checks are in order, you can focus on other possible problems. In order to fix a PC that won’t turn on, it’s essential to first make sure that any cables coming loose are secure and are not starting to cause interference. One way that people tend to do this is by putting masking tape over their audio connection in order to prevent the wires coming loose. If you want to fix a computer that won’t turn on, you’ll have to go a little further.
In order to troubleshoot a monitor that won’t turn on, the computer needs to be rebooted. If you’re trying to troubleshoot a laptop, you’ll have to restart the entire system in order for the blank screen to appear. Once you have rebooted, you’ll need to look to see what caused the problem to begin with. It could be a driver issue or it could be a simple enough thing as the cables coming loose. A monitor that won’t turn on won’t have anything to do with the hardware unless you’re having some sort of error.
Reseat the Hardware Inside
The first thing to remember when trying to fix a computer that won’t turn on is to always be patient. If you’re having trouble with your computer, you may want to boot into Windows restore and let it fix whatever issues it has for you. If this doesn’t work, simply remove any hardware from the computer, turn it off, and then reinstall Windows. This will generally work to get things back on track. Just be sure that you’re not trying to do anything to damage your motherboard by removing any of its hardware before you remove the problematic software or applications.
Once you have done this you should then boot up into windows again, but this time use the bios you had previously installed and replace the left boot chips with those of a newer model. This will allow your computer to boot up in safe mode, as well as perform the necessary operations to make it boot up as normal. You should now be able to try running a few programs like Word, Outlook and Windows Vista if they were not working before.