Getting “The Parameter is Incorrect” Error in Windows 10? 5 Ways to Fix

WRITTEN BY: supportmymoto.com STAFF

Does your PC show a “Location is just not out there” or “The Parameter is wrong” error if you open an exterior laborious drive, USB thumb drive, or an SD card? We’ll clarify why that occurs and 5 potential options to the issue.

You’ll get this error if the drive you’re attempting to entry is flawed, contaminated with a virus, or comprises corrupt information. You might also be unable to open a drive if there’s an issue along with your PC’s USB port—maybe because of outdated USB drivers or bodily harm.

[01-fix-the-parameter-incorrect-windows-10.png]

Earlier than you attempt the troubleshooting steps beneath, change the drive to a different port in your pc and verify if you happen to can entry the drive.

1. Run Verify Disk Utility

The Verify Disk utility is a built-in device that fixes defective sectors and corrupted information on inside and exterior drives. Scan the problematic drive utilizing the utility and verify if that resolves the problem.

1. Launch the File Explorer, right-click the affected drive, and choose Properties on the context menu.

2. Go to the Instruments tab and click on the Verify button.

3. Click on Scan and restore drive to proceed.

The Verify Disk utility will scan your disk instantly. Notice that this course of might take some time relying on the dimensions and content material of the drive.

In the course of the scan, Home windows will routinely restore dangerous sectors it finds on the drive. Likewise, the device can even repair potential file system errors inflicting the “parameter is wrong” error.

If the Graphical Consumer Interface (GUI) model of the Verify Disk utility doesn’t discover any drawback with the drive, use the Command-Line model of the device to run a affirmation verify. This model runs a radical scan of your drive and would possibly repair points that the GUI Verify Disk utility missed.

See also  What is Kari Sweets real name? I know it’s not Leah Rodriguez. Thanks.?

Earlier than you proceed, pay attention to the drive letter of the affected disk. On this tutorial, we’ll scan the USB Drive labeled F: within the File Explorer.

This could be totally different relying on the variety of disks related to your PC.

Proper-click the Begin Menu and choose Command Immediate (Admin).

Sort chkdsk, depart an area, sort the drive letter adopted by a colon (F: on this case), depart an area, sort /f, depart an area, sort /r, and press Enter. The command ought to appear to be this: chkdsk F: /f /r

The Verify Disk utility will execute the command and scan the drive for errors and dangerous sectors; this will take a few minutes relying on the disk dimension and recordsdata within the disk. After the scan, the Chkdsk device will let if it discovered an issue or dangerous sectors.

2. Repair the error with the System File Checker (SFC)

As talked about earlier, file system corruption inside your pc might additionally immediate this error, even on exterior drives. The System File Checker is one other built-in Command Immediate-based device that may assist repair, restore, or substitute corrupt and lacking system recordsdata.

Because you’re operating Home windows 10, it’s really useful to first run the Deployment Picture Servicing and Administration (DISM) earlier than operating the System File Checker. That method, DISM will first obtain inside system recordsdata from Microsoft’s server. Afterward, the SFC swoops in to repair system file errors by changing lacking or corrupted recordsdata with those downloaded from Microsoft’s servers. It’s a straightforward and easy course of.

Notice: The Deployment Picture Servicing and Administration (DISM) command requires an web connection to repeat/obtain recordsdata from Microsoft’s server. So, join your PC to the web earlier than you proceed.

1. Launch the Command Immediate as an administrator, paste the command beneath within the console, and press Enter.

See also  What Motherboard Do I Have? How To Check Your Hardware

DISM.exe /On-line /Cleanup-image /Restorehealth

That’ll immediate the DISM device to obtain system recordsdata from Microsoft’s servers. This course of will take a number of minutes, relying in your web velocity. Proceed to the subsequent step if you get successful message.

2. Paste the command beneath and press Enter.

sfc /scannow

The command will immediate the SFC to scan your PC for lacking or corrupt system recordsdata and substitute them accordingly. When the scan hits 100% and also you get successful message, attempt opening the affected drive. If the error persists, restart your pc and open the drive once more.

3. Scan the Drive with an Antivirus

If a virus an infection is chargeable for the “Parameter is wrong” error, the Verify Disk utility and System File Checker might not repair the issue. Scan the affected drive along with your antivirus software program and verify if it finds any virus or malware. When you don’t have an antivirus, verify our suggestions on the best virus scanners that’ll nuke any virus.

4. Replace the Disk Drivers

You might be unable to entry an inside or exterior disk if its drivers are out-of-date or malfunctioning. Observe the steps beneath to verify the standing of the affected disk and replace its drivers.

1. Proper-click the disk within the File Explorer and choose Properties.

2. Go to the {Hardware} tab to see the drivers powering the disk. Choose a disk drive and verify the Gadget Properties part.

If the Gadget standing doesn’t learn “The machine is working correctly,” there’s an issue with the driving force. Proceed to the subsequent step to replace the drivers, even when it’s working correctly.

3. Choose a driver and click on Properties. You need to replace all drivers on the checklist; you by no means know which one is problematic or inflicting the “The parameter is wrong” error.

4. Within the Common tab, click on Change settings.

5. Navigate to the Driver tab and click on Replace Driver.

6. Choose Search routinely for up to date driver software program.

Home windows will search each your pc and on-line for the newest model of that individual driver. For the very best outcome, ensure that your PC is related to the web both by way of Wi-Fi or Ethernet. Repeat these steps for all disk drives, restart your PC and take a look at opening the disk once more.

See also  Google Chrome Profile Error Occurred [SOLVED]

5. Format the Drive

You need to solely format the affected drive as a final resort. Earlier than you accomplish that, nevertheless, attempt accessing the drive on one other pc. If the “The parameter is wrong” error additionally pops up on a special PC, then proceed to format the drive.

Notice that formatting the drive will completely erase its contents. Nonetheless, the motion can even create a brand new file system and get rid of errors inflicting the issue. You may use a third-party utility to format the drive or observe the steps beneath to make use of the built-in Home windows formatting device. 

1. Proper-click the drive within the File Explorer and choose Format.

2. Click on Begin to proceed.

3. Lastly, click on OK on the affirmation immediate.

The Drawback Could Be Unfixable

When you’re nonetheless getting the “parameter is wrong” error after formatting the drive, there’s a chance that the storage machine is completely broken. If that’s the case, the machine can neither be fastened nor used.

You may attempt recovering your recordsdata from the broken USB stick. We even have a complete information on extracting files from a dead hard drive. Verify them out and tell us if you happen to want any assist.


NOTE : Please do not copy - https://supportmymoto.com

Leave a Reply